Weathervane Horse

Equestrian ? Farming? or just love horses, our Weathervane Horse is a great addition to your stables, house or anywhere that you can place it. Our premium quality weathervanes are an eye-catching and unique home or garden feature. This stunning Horse weathervane is handmade in New Zealand from sand-cast aluminium and brass, using traditional methods and powder coated in black for long-lasting colour.

All of our weathervanes have smooth running movement and a plate welded to the base stem for easy installation. 

Horse weathervane dimensions:

• Overall Height: 890 mm
• Overall Length: 440 mm
• Shape Height: 240 mm
• Shape Length: 250 mm
• NSEW Length: 430 mm

Weathervane Installation Instructions:
1. Decide on a suitable open and prominent position to locate your weathervane.
2. Source suitable non-corrosive fixings - bolts or screws (depending on what you are fixing the weather vane to).
3. Find the ideal position for the bottom plate, screw/bolt in one screw/bolt (not tight yet, just to hold it in place while you level) use spirit level to get stem vertical, then screw/bolt all fixings firmly in place.
4. Open up the N.S.E.W. and push the Lock Washer down into position to form the cross.
5. Use a spirit level to ensure that the support stem is straight and upright. Now Screw the bottom plate of the stem firmly to your fixture using non-corrosive screws or bolts.
6. Slide on the NSEW to rest on the support stem. Use a compass to find north, aim to the correct position and firmly tighten off the lock bolt.
7. Before sliding on the top section, apply some grease to the axle.

Important: The ball bearing must slide up inside the axle to rest on top of the shaft, this will reduce wear and ensure smooth movement.

SHIPPING & INTERNATIONAL ORDERS: Free shipping New Zealand wide - for international orders please get in touch.